Nätverk

T2703

TCP/IP

Utbildningen är för dig som vill lära dig TCP/IP-protokollet i detalj, på en tekniskt kvalificerad nivå. TCP/IP-arkitekturen gås igenom tillsammans med protokoll relaterade till denna. Utbildningen behandlar även routing i TCP/IP-baserade nätverk.

T2118

Trådlösa nätverk

Ska du arbeta med uppbyggnad av trådlösa nätverk eller vill du prova på olika trådlösa sätt att nå Internet? Den här utbildningen fokuserar på att samla de begrepp som diskuteras inom ramen för mobilt Internet och visa på var teknikerna står i dag. Du får lära dig om WLAN, Bluetooth, WAP, GPRS, UMTS, High Speed Data, hur du konfigurerar, mäter och använder trådlös kommunikation, samt om säkerheten i trådlösa tekniker.

T2701

Nätverksteknik och datakommunikation

Detta är utbildningen för dig som vill ha en säker grund att stå på inom nätverks- och datakommunikationsområdet. Utbildningen går igenom terminologi, hur datanät byggs upp, arkitekturer, protokoll och standarder och sätter dem i ett praktiskt sammanhang för att få förståelse för hur de olika delarna hänger ihop och varför vi har den miljö som vi har idag.

T2909

Internet och nätverk för beslutsfattare, kravställare och säljare

Detta är utbildningen för dig som behöver grundläggande kunskaper inom terminologi och funktionalitet när det gäller moderna nätverk och internet. Kursen har inga praktiska laborationer utan teori med inslag av praktiska exempel från läraren. Kursen är ett snabbt sätt att sätta sig in i ämnet. Målgrupp är chefer, projektledare, säljare och liknande befattningar.

T1130

Ethernet IntroduktionsWorkshop

En introduktion till Ethernet för dig som inte tidigare arbetat med området. Kursen levereras endast som företagsintern grupputbildning.

T1125

Internet protocol Version 6

A new hands on training !! IPv6 is available now. This training gives the student a comprehensive understanding how the IPv6 protocol works. An important part of the training is how to implement the IPv6 protocol in your business. It is not only theoretical but this course contains a lot of lab’s for configuring your (Microsoft w 2008 ) operating systems and also your network infrastructure hardware (routers-switches-firewalls).

TRS2026

IPv6 Advanced Routing and Design

Denna labb är en avancerad IPv6-labb med mycket fokus på IPv6 routing. Labben fokuserar på de protokoll och mekanismer som definieras inom IPv6-adressering samt IPv6 routing med många praktiska övningar / labbar. Dessutom diskuteras funktioner som påverkas vid övergång till IPv6-nätverk, såsom routingprotokoll och DNS. Teori blandas med praktiska övningar under labbens gång.

TRS2027

IP Routing Technical

I denna tredagarslabb inom avancerad routing kommer du att utveckla avancerade färdigheter, som hjälper dig att optimera konfiguration och design av routerbaserade nätverk. Labben går även igenom komplexa kommandon och koncept för uppbyggnad av stora skalbara nätverk. Undervisningen inriktar sig på tillämpningar av principer för routingprotokoll i storskaliga nätverk.

A2513

Check Point Security Expert R75

Check Point Security Expert is a five-day instructor-led hands-on course, delivering the advanced concepts and skills to optimize the R71 Check Point Software Blade architecture. This course is designed to help maximize the performance of your Check Point security deployment with real-world scenarios including advanced routing, load balancing and high availability. During the course you will set up multiple security gateway clusters, analyze network intrusion alerts and generate advanced network

T2705

IP-routingprotokoll

En praktiskt inriktad utbildning för dig som vill ha djupare kunskaper om de vanligaste routingprotokollen som används i moderna IP-nätverk. Utbildningen behandlar protokoll som RIP, OSPF och BGP, samt routing för multicasttrafik och IPv6.

T2706

IPv6

Utbildningen går igenom uppbyggnad, funktioner och tjänster i den nya IP-standarden IPv6. Jämförelser görs och skillnader gentemot dagens IPv4 belyses. Utbildningen ger teknisk kunskap om hur migrering från, och samexistens med, IPv4 går till samt ger konkreta exempel på implementationer.

T2707

SNMP & Network Management

Utbildningen vänder sig till tekniker som ska sätta upp ett nätövervakningssystem. Utbildningen ger kunskaper i planering och driftsättning av övervakningssystem, SNMP och arkitekturen kring MIB samt en inblick i de vanligast förekommande plattformarna på marknaden.

T2709

IP-telefoni

Denna utbildninge vänder sig till dig som behöver en översikt rörande voice over IP. Efter utbildningen kommer du ha en förståelse för kraven som IP telefoni ställer på ditt nätverk, operatör, telefonileverantörer och din organisation.

T2708

DNS

Detta är en komplett utbildning som behandlar DNS-systemet och alla dess ingående delar. Utbildningen, vänder sig till systemadministratörer eller personer med motsvarande behov. Den ger praktisk och teoretisk kunskap om DNS och programvaran BIND. Under kursen används ett linuxbaserat operativsystem för de olika laborationerna. Deltagarna lär sig att sätt upp och konfigurera BIND för att tillhandahålla funktionalitet som tas upp teoretiskt i de olika kapitlen, så som delegering, redundans och mu

TRS2703

Mastering PKI & Certificate Services 2008 R2 Edition

Du kommer att installera, konfigurera, testa och managera en PKI med Active Directory, samt få grundläggande PKI-kunskaper om design, standarder och säkerhetskrav etc.

TRS2724

Mastering Forefront TMG 2010

Kent Nordström, en av världens främsta experter på Forefront Edge, har utvecklat denna labb baserat på sin långa erfarenhet av hur kunder använder Forefront Edge-lösningar.

A2512

Check Point Security Administrator R75

Check Point Security Administrator is a foundation course for Check Point’s Security Management and Gateway Systems. This 4-day course provides hands-on training to attain the skills necessary to configure R71 Check Point Software Blades including Firewall, IPSEC VPN, IPS, Network Policy Management, Logging & Status, and Monitoring, URL Filtering, Antivirus/Anti-malware, Anti-spam & Email Security. During this course, students will configure a Security Policy, secure communications across the In

A2508

SmartCenter for Pointsec - MI R70 (Endpoint Security Series)

This course provides you with an overview of the management theory for SmartCenter for Pointsec MI and then takes you through a “compact” demonstration installation of the product. Once installed, the course then guides you through the interface, and provides exercises in adding the necessary secondary framework components for managing Check Point Endpoint Security products.

A2509

Endpoint Security – Media Encryption

This course provides an understanding of basic concepts and skills necessary to configure and manage Endpoint Security Media Encryption. During this course, you will configure a Endpoint Security Media Encryption Server to manage client machines, and learn about managing and monitoring client media access.

A2510

Check Point Endpoint Security (R70) Secure Access

Check Point Endpoint Security is a unified approach to protecting endpoints from unauthorized and illicit access using Check Point’s wide range of security products. Secure Access is the component of Endpoint Security that guards against endpoint misuse and threats such as spyware and virus attacks using Program Control, Firewall and Enforcement rules, and virtual private networking.

A2511

Check Point Endpoint Security Full Disk Encryption

This course teaches you how to configure and manage an Endpoint Security FDE protected device using the Endpoint Security FDE Management Console. You will learn the details of hard-disk encryption, and how best to deploy Endpoint Security FDE in your organization.

MS50357A

Implementing Forefront Threat Management Gateway 2010

Denna kurs lyfter fram hur man kan och bör implementera Forefront TMG i ett företags nätverk samt de olika möjligheterna och funktionerna man har för att publicera olika tjänster och interna system. Så som migrering från föregångaren ISA, publicering av Exchange eller Sharepoint lösningar eller design av redundans och lastbalansering.

MS50360A

Implementing Forefront Protection 2010 for Exchange and SharePoint

This two-day instructor-led course provides students with the knowledge and skills to envision, design, and deploy security solutions based on the Microsoft Forefront suite that protect organizations using Microsoft Exchange Server and Microsoft SharePoint Server, enabling them to identify the requirements and make the appropriate design decisions that will come up during the deployment process, and providing hands-on experience with the products.

MS50382A

Implementing Forefront Identity Manager 2010

This four-day instructor-led courseintroduces and explains the features and capabilities of Microsoft Forefront Identity Manager 2010 (FIM), and provides an overview of the solution scenarios that FIM addresses. The course format includes presentation, discussion, demonstration, and many hands-on exercises. It is intended for students who have no previous Forefront Identity Manager 2010 or Microsoft Identity Lifecycle Manager 2007 (ILM) experience.

MS50402

Implementing Forefront Unified Access Gateway 2010

Denna 3-dagars kurs riktar sig till tekniker och administratörer som vill designa och implementera Forefront UAG inom företagets nätverk. Forefront UAG är framtagen för att möjliggöra för organisationer att styra åtkomst till interna resurser för externa användare. Samt för att integrera företagets Windows 7 klienter med DirectAccess och därigenom öka säkerhet och funktionalitet genom att klienterna alltid är kopplade till företagets nätverk utan behov av att manuellt aktivera VPN. Användarna

TRS2012

Mastering ForeFront UAG 2010

UAG 2010 är idag ett "måste" hos de flesta företag med en infrastruktur baserad på en modern Microsoft-plattform. Detta gäller vare sig man vill använda DirectAccess eller inte.

TRS2831

Forefront Protection Suite 2010

Nu är alla produkter i Forefront Protection Suite 2010 äntligen RTM! Johan Blom, Forefront MVP, lär dig sätta upp och administrera Forefront Endpoint Protection, Forefront Protection for Exchange och Forefront Protection for SharePoint för att få en komplett Malware Defence in Depth-lösning.

TRS2833

Linux Security for Administrators

En praktisk hands-on labb i säkerhet på Linuxplattformen. I realistiska övningar får du kunskaper om aktuella attackscenarion och hot, samtidigt som du får koll på metodiken och verktygen för att skydda dig. Ett måste för dig som jobbar med och ansvarar för Linuxsystem. Labben är utvecklad av Truesecs främsta säkerhetsexpert inom Linux - David Jacoby. Innehållet baserar sig på lång praktisk erfarenhet från säkerhetsuppdrag hos ett stort antal bolag och myndigheter i Sverige.

A2514

CCSA R70 Upgrade

This accelerated course provides an understanding of the concepts and skills necessary to configure Check Point Security Gateway and Management Software Blades. This course only covers topics in the current CCSA R70 course that are not covered in previous CCSA versions. During the course, you will configure, manage, monitor and maintain a corporate and branch office network. In addition, you will upgrade and configure a Security Gateway to implement a virtual private network (VPN) for both inter

A2515

CCSE R70 Upgrade

This accelerated course provides an understanding of the advanced concepts and skills necessary to configure and optimize Check Point Security Gateway and Management Software Blades. This accelerated course is Guided Lab format and there are no lectures. This course covers topics in the current CCSE R70 course that are not covered in the CCSA R65 course. Additional new content from the CCSA R70 class is also covered.

TRS2701

Securing Windows Systems

Den mest grundläggande labben för dig som vill lära dig bygga säkerhet i din Microsoftmiljö.

A2502

Check Point Security Administration NGX II

Utbildningen riktar sig främst till systemadministratörer, säkerhetsadministratörer och nätverkstekniker som implementerar VPN-1/FireWall-1. Utbildningen är förberedande för Check Points certifiering CCSE.

A2501

Check Point Security Administration NGX I

Utbildningen riktar sig till nätverksadministratörer och säkerhetspersonal som behöver lära sig FireWall-1 NG. Utbildninen ger hands-on erfarenhet. Utbildningen förbereder för Check Points certifiering CCSA.

T2214

Säkerhet i trådlösa nätverk

Under denna utbildning får du en översikt av säkerhet i trådlösa nätverk: vilka hot som finns, vilken säkerhet som finns inbyggd samt vilka möjligheter man har att öka säkerheten.

T622

Internetsäkerhet - attacker, brandväggar och kryptering

Detta är utbildningen för dig som vill lära dig allt om säkerhet i nätverksrelaterade miljöer. Det här är en väldigt uppskattad och rolig kurs, där man får göra saker man inte trodde var möjligt (eller i alla fall inte trodde var så lätt). Många deltagare går hem med ett leende på läpparna men samtidigt en oro för sin egen datormiljö.

A2504

Accelerated CCSE NGX

Utbildningen riktar sig till Check Point-tekniker som innehar CCSE-certifieringen eller motsvarande kunskaper på Check Point NG with AI. Utbildningen är en accelererad variant av kurserna A2501 - Check Point Security Administration NGX I och A2502 - Check Point Security Administration NGX II.

A2503

Check Point Security Administration NGX III

Check Point Security Administration NGX III offers comprehensive training to enhance enterprise knowledge of VPN-1 NGX, network planning, route-based VPN, and troubleshooting procedures.

MS6331

Deploying and Managing System Center Virtual Machine Manager V2

Denna utbildning på tre dagar lär dig att implementera och administrera en virtualiseringslösning med hjälp av System Center Virtual Machine Manager.

MS6451

Planning, Deploying and Managing System Center Configuration Manager 2007 R3

This course provides students with the knowledge and skills to plan, deploy, and manage Configuration Manager 2007. The course focuses on planning and deploying sites and clients, configuring software distribution, deploying operating systems, and managing software updates. It also focuses on remote tools and managing mobile devices.

T2817

Introduktion till Microsoft System Center

Denna utbildning riktar sig till dig som idag arbetar med drift och systemunderhåll, den riktar sig även till dig som planerar att införa System Center-familjen för att ta kontroll över sin miljö och arbeta effektivare. Utbildningen innehåller installation av de olika komponenterna och produkterna, inställningar och trimning av miljön. Vi går igenom de dagliga uppgifterna samt grundläggande felsökning rörande Ops Mgr 2007, Conf Mgr 2007 och Data Protection Manager 2007.

T2761

Implementing Microsoft Application Virtualization 4.5

Microsoft App-V är en applikation som används för att virtualisera och distribuera programvara till användare av klientdatorer i ett större Windowsnätverk. Tack vare virtualiseringstekniken kan programvaror som är inkompatibla med varandra installeras och köras på samma dator samtidigt utan problem.

MS50028

Installing and Configuring System Center Operations Manager 2007 R2

Under utbildningen får du lära dig allt du behöver veta för att komma igång med System Center Operations Manager 2007. Utbildningen går även igenom hur du migrerar en befintlig MOM 2005-lösning.

T2915

System Center Suite SMSE Bootcamp

The SMSE Bootcamp is a dynamic 3-day training course which brings together the core products from Microsoft's System Center Suite in a series of "Real World", data center management scenarios. The course has been specifically designed for Technical Consultants to give them the skills and understanding they need to successfully implement the System Center Suite for customers and end users.

MS50216

System Center Operations Manager 2007: Advanced Configuration and Administration

Denna avancerade fortsättningsutbildning lär dig att felsöka, konfigurera och administrera din Operations Manager-lösning effektivare än någonsin. Efter avklarad utbildning kommer du att ha en helt ny förståelse för dom mer avancerade delarna av Operations Manager 2007.

MS50213

Implementing System Center Data Protection Manager 2007

Denna utbildning på två dagar lär dig att installera, konfigurera och administrera Microsofts System Center Data Protection Manager

MS50231

System Center Operations Manager 2007: Advanced Management Pack Authoring

Denna utbildning på tre dagar lär dig bygga egna management pack ifrån grunden. Utbildningen går igenom komponenterna i management pack och vad ni skall tänka på när ni utvecklar egna management packs.

T201015

Getting Started with Configuration Manager 2012

MS50215

System Center Configuration Manager 2007 R2 - Advanced Configuration and Troubleshooting

This three-day instructor-led course provides students with advanced knowledge and skills to configure and troubleshoot Configuration Manager 2007 R2. The course focuses on advanced troubleshooting and configuration for deploying sites and clients, configuring software distribution, deploying operating systems, and managing software updates. It also focuses on tools and managing Internet based devices.

MS6436

Designing a Windows Server® 2008 Active Directory Infrastructure and Services

Efter denna utbildning har du fått lära dig allt du behöver för att kunna planera för ett Active Directory i en Windows Server 2008-miljö.

MS6432

Managing and Maintaining Windows Server 2008 Active Directory Servers

Efter denna utbildning har du fått lära dig allt du behöver för att kunna administrera Active Directory i en Windows Server 2008-miljö.

MS6424

Fundamentals of Windows Server 2008 Active Directory

Denna utbildning riktar sig till den med ingen eller liten erfarenhet av Active Directory och som vill komma igång med Active Directory och Windows Server 2008.

MS6425

Configuring and Troubleshooting Windows Server 2008 Active Directory Domain Services

Denna utbildning syftar till att utbilda dig med erfarenhet av Active directory och som vill veta allt om Active Directory och Windows Server 2008.

MS6416

Updating your Network Infrastructure and Active Directory Technology Skills to Windows Server 2008

Denna utbildning är till för dig med tidigare erfarenhet av Windows Server och som vill uppdatera dina Active Directory- och Infrastrukturskunskaper.

MS6420B

Fundamentals of Windows Server 2008 R2

The purpose of this 5-day course is to teach students the basic fundamentals of networking, security, and server administration with Windows Server 2008. It is intended to provide the foundational knowledge needed to prepare for the Microsoft Technology Associate (MTA) exams and begin building a career in Microsoft technologies.

MS50412A

Implementing Active Directory Federation Services 2.0

This four-day instructor-ledcourse provides students with the knowledge and skills to install and configure Active Directory Federation Services 2.0 (AD FS). The course focuses on terminology, user interfaces, and common configuration scenarios for AD FS. Students will learn how to design AD FS environments and supporting technology such as a Public Key Infrastructure. Students will also learn how to design AD FS for security and high availability.

T201016

Advanced Active Directory Replication

MVP Tomasz Onyszko (experienced technician, trainer and highly appreciated speaker at numerous conferences like TechEd) delivers this advanced, 3-day training in Active Directory data replication mechanics and SYSVOL replication using FRS\DFS-R

TRS2835

Mastering Active Directory

I denna labb lär du dig hur Active Directory faktiskt fungerar och vilka komponenter som tjänsten är uppbyggd av. Om du arbetar med Active Directory dagligen men vill fördjupa dig i tekniken eller ofta kör fast när du står inför förändringar och felsökning är detta en labb som passar dig.

A2512

Check Point Security Administrator R75

Check Point Security Administrator is a foundation course for Check Point’s Security Management and Gateway Systems. This 4-day course provides hands-on training to attain the skills necessary to configure R71 Check Point Software Blades including Firewall, IPSEC VPN, IPS, Network Policy Management, Logging & Status, and Monitoring, URL Filtering, Antivirus/Anti-malware, Anti-spam & Email Security. During this course, students will configure a Security Policy, secure communications across the In

A2511

Check Point Endpoint Security Full Disk Encryption

This course teaches you how to configure and manage an Endpoint Security FDE protected device using the Endpoint Security FDE Management Console. You will learn the details of hard-disk encryption, and how best to deploy Endpoint Security FDE in your organization.

A2510

Check Point Endpoint Security (R70) Secure Access

Check Point Endpoint Security is a unified approach to protecting endpoints from unauthorized and illicit access using Check Point’s wide range of security products. Secure Access is the component of Endpoint Security that guards against endpoint misuse and threats such as spyware and virus attacks using Program Control, Firewall and Enforcement rules, and virtual private networking.

A2509

Endpoint Security – Media Encryption

This course provides an understanding of basic concepts and skills necessary to configure and manage Endpoint Security Media Encryption. During this course, you will configure a Endpoint Security Media Encryption Server to manage client machines, and learn about managing and monitoring client media access.

A2508

SmartCenter for Pointsec - MI R70 (Endpoint Security Series)

This course provides you with an overview of the management theory for SmartCenter for Pointsec MI and then takes you through a “compact” demonstration installation of the product. Once installed, the course then guides you through the interface, and provides exercises in adding the necessary secondary framework components for managing Check Point Endpoint Security products.

A2514

CCSA R70 Upgrade

This accelerated course provides an understanding of the concepts and skills necessary to configure Check Point Security Gateway and Management Software Blades. This course only covers topics in the current CCSA R70 course that are not covered in previous CCSA versions. During the course, you will configure, manage, monitor and maintain a corporate and branch office network. In addition, you will upgrade and configure a Security Gateway to implement a virtual private network (VPN) for both inter

A2515

CCSE R70 Upgrade

This accelerated course provides an understanding of the advanced concepts and skills necessary to configure and optimize Check Point Security Gateway and Management Software Blades. This accelerated course is Guided Lab format and there are no lectures. This course covers topics in the current CCSE R70 course that are not covered in the CCSA R65 course. Additional new content from the CCSA R70 class is also covered.

A2501

Check Point Security Administration NGX I

Utbildningen riktar sig till nätverksadministratörer och säkerhetspersonal som behöver lära sig FireWall-1 NG. Utbildninen ger hands-on erfarenhet. Utbildningen förbereder för Check Points certifiering CCSA.

A2502

Check Point Security Administration NGX II

Utbildningen riktar sig främst till systemadministratörer, säkerhetsadministratörer och nätverkstekniker som implementerar VPN-1/FireWall-1. Utbildningen är förberedande för Check Points certifiering CCSE.

A2503

Check Point Security Administration NGX III

Check Point Security Administration NGX III offers comprehensive training to enhance enterprise knowledge of VPN-1 NGX, network planning, route-based VPN, and troubleshooting procedures.

A2504

Accelerated CCSE NGX

Utbildningen riktar sig till Check Point-tekniker som innehar CCSE-certifieringen eller motsvarande kunskaper på Check Point NG with AI. Utbildningen är en accelererad variant av kurserna A2501 - Check Point Security Administration NGX I och A2502 - Check Point Security Administration NGX II.

MS6431

Managing and Maintaining Windows Server 2008 Network Infrastructure Servers

Denna utbildning lär dig det du behöver kunna för att planera för och administrera Windows Server 2008-servrar med fokus på nätverk och infrastruktur.

TRS2703

Mastering PKI & Certificate Services 2008 R2 Edition

Du kommer att installera, konfigurera, testa och managera en PKI med Active Directory, samt få grundläggande PKI-kunskaper om design, standarder och säkerhetskrav etc.

MS6420

Fundamentals of Windows Server 2008 Network Infrastructure and Application Platform

Denna utbildning lär dig grunderna i att installera och konfigurera Windows Server 2008 för att bygga ett nätverk och även för att nyttja som applikations-server.

MS6421

Configuring and Troubleshooting a Windows Server 2008 Network Infrastructure

Denna utbildning ger dig de kunskaper du behöver för att bygga en infrastruktur, ett nätverk, med Windows Server 2008. Du får lära dig att implementera och konfigurera ett nätverk som är både säkert och felfritt. Du får lära dig både specifika Windows Server 2008-tekniker samt allmäna nätverkstekniker.

MS6435

Designing a Windows Server 2008 Network Infrastructure

Efter denna utbildning har du fått lära dig allt du behöver för att kunna planera och designa en nätverksinfrastruktur i en Windows Server 2008-miljö.

MS50025

Powershell for Administrators

Utbildningen riktar sig till Administratörer som vill förenkla och effektivisera sitt dagliga administrationsarbete. PowerShell ger förutsättningar till automatisering, förenkling och batchning på en nivå som aldrig varit möjlig i DOS.

TRS2701

Securing Windows Systems

Den mest grundläggande labben för dig som vill lära dig bygga säkerhet i din Microsoftmiljö.

MS50290A

Understanding and Administering Windows HPC Server 2008

This three-day instructor-led course provides students with the knowledge and skills to manage and deploy Microsoft HPC Server 2008 clusters.

TRS2835

Mastering Active Directory

I denna labb lär du dig hur Active Directory faktiskt fungerar och vilka komponenter som tjänsten är uppbyggd av. Om du arbetar med Active Directory dagligen men vill fördjupa dig i tekniken eller ofta kör fast när du står inför förändringar och felsökning är detta en labb som passar dig.

T2953

HP Insight Control Fundamentals

This 2-day course provides an introduction to the HP Insight Control Environment software. Students will be presented with an overview of the ICE software including topics on monitoring, deployment, virtual machine management, patch management, Insight Dynamics VSE, C-Class blade management and Virtual Connect Management.

T2954

HP Insight Control Management/Monitoring through HP SIM

This course equips students with the skills and knowledge to configure the management and monitoring capabilities of HP Systems Insight Manager (HP SIM). Students will spend the majority of the time learning to use HP Systems Insight Manager for managing systems and performing collections, along with inventory and fault management. The course will also cover the integration of various options within HP Insight Control suite for performance, patch management and HP BladeSystem management.

T2955

HP Insight Control Server Deployment

This 3-day course provides students with the skills needed to effectively deploy and update ProLiant servers using the Insight Control Suite ICE). This course is also applicable to ProLiant Essentials customers using the Rapid Deployment Pack (RDP) product.

T2882

HP Insight Control Suite Introduction

This 2-day course provides an introduction to the HP Insight Control Environment software. Students will be presented with an overview of the ICE software including topics on monitoring, deployment, virtual machine management, patch management, Insight Dynamics VSE, C-Class blade management and Virtual Connect Management.

T2883

HP Insight Control Suite: Managing and Monitoring with HP SIM

This 4-day course equips students with the skills and knowledge to plan, deploy and configure the management and monitoring capabilities of Insight Control Environment. Students will spend the majority of the time learning to use HP Systems Insight Manager (HP SIM) for managing systems and performing collections, along with inventory and fault management. The course will also cover the integration of various options within Insight Control Environment for performance, patch management and virtual

T2884

HP Insight Control Suite: Deploying and Updating with RDP

This 3-day course provides students with the skills needed to effectively deploy and update ProLiant servers using the Insight Control Environment ICE). This course is also applicable to ProLiant Essentials customers using the Rapid Deployment Pack (RDP) product.

T2929

HP StorageWorks P4000 SAN Configuration and Administration

This course begins with the information required to understand, manage, and configure your HP StorageWorks P4000 SAN. This training covers topics such as HP SAN/iQ® Software features and functionality, configuration, iSCSI protocol, as well as HP SAN/iQ Software in several popular application environments such as Microsoft SQL, Microsoft Exchange, and Oracle.

T2881

Virtual Connect for HP BladeSystem

This 2-day instructor led training course covers how Virtual Connect integrates with c_Class blade technology. It covers the integration and use of Virtual Connect (VC) Ethernet and Fibre Channel technology. Students will configure the Virtual Connect Ethernet and Virtual Connect Fiber channel modules. Each topic will involve lab scenarios that will reflect real-world scenarios for network connectivity.

T2842

HP BladeSystem Administration

This 3-day course teaches students how to manage HP BladeSystem components. An architecture overview will ensure understanding of the components of HP BladeSystem solutions. The components will provide coverage of the HP Onboard Administrator, HP Virtual Connect, Blade Servers, Storage Blades, and Interconnects. Virtual Connect is discussed with examples of configuration and simple network setups. This course will help you prepare for BladeSystem certification.

T1016

HP StorageWorks P4000 SAN Configuration and Administration

This course begins with the information required to understand, manage, and configure your HP StorageWorks P4000 SAN. This training covers topics such as HP SAN/iQ® Software features and functionality, configuration, iSCSI protocol, as well as HP SAN/iQ Software in several popular application environments such as Microsoft SQL, Microsoft Exchange, and Oracle.

T2930

VMware View 4:5: Install, Configure, Manage

This hands-on training course builds your skills in the VMware View suite of products: VMware View Manager, VMware View Composer, and VMware ThinApp™. This course is 60 percent lecture and 40 percent hands-on labs.

CI-CUWSS

Conducting Cisco Unified Wireless Site Survey (CUWSS)

Conducting Cisco Unified Wireless Site Survey (CUWSS) v1.0 is a five-day day instructor-led course, designed to help students prepare for the CCNP® wireless certification, a professional-level certification specializing in the wireless field. The goal of the course is to provide students with information and practice activities to prepare students to technically plan and conduct a wireless site survey.

CI-CWAAS

Cisco Wide-Area Application Service (CWAAS)

Five-day ILT covering the WAAS v4.1 "Davis" product, especially for channel SEs and FEs. WAAS Mobile is also covered. This is a fundamentals course that can stand-alone for knowedge and skill content. It can also be foundational as a prerequisite for more advanced Design and Troubleshooting courses.

CI-DCUCD

Data Center Unified Computing Design (DCUCD)

The goal of the DCUCD 3.0 curriculum is to enable engineers to design scalable, reliable, and intelligent Data Center Unified Computing solutions based on Cisco Unified Computing System (UCS), Cisco Nexus family switches, Catalyst 6500 in Virtual Switching System (VSS), MDS family SAN switches with NX-OS, Data Center Network Manager (DCNM) and MDS Fabric Manager configuration and management applications, VMware server virtualization products, and Linux and Microsoft Windows operating system.

CI-DCUCI

Data Center Unified Computing Implementation

The Cisco Data Center Unified Computing Implementation course is designed to teach stu-dents knowledge of the fundamentals of the Cisco Unified Compute System and the ability to implement a virtualized Data Center environment. In addition the student also learns on how to implement the Cisco Unified Computing System (UCS) in an enterprise data center routing and switching infrastructure with the next-generation Cisco Nexus product family.

CI-SWITCH

Implementing Cisco IP Switched Networks

This course is a component of the Cisco CCNP Routing and Switching curriculum. This course is designed to give students a firm understanding of how to manage switches in an enterprise campus environment. This training class reinforces the instruction by providing students with hands-on labs.

FL-DOTFN

IBM N series Data ONTAP Fundamentals (DOTFN)

Data ONTAP® 7.3 Fundamentals is an instructor-led course designed for those who provide support and administration on IBM N series storage systems running the Data ONTAP operating system. The course covers Write Anywhere File Layout (WAFL) file system, volumes, aggregates, qtrees, and quotas. Hands-on labs for the course focus on the basic administrative use of Data ONTAP in NAS and IP-SAN environments.

FL-SANN

IBM N series Data ONTAP SAN Administration (SANN)

The SAN Administration on IBM N series® Data ONTAP® 7.3 course was designed for those who provide support and administration for FC and IP SAN environments running the Data ONTAP operating system. This course is delivered using Windows® and UNIX® hosts. The course covers SAN infrastructure preparation, storage provisioning options, creation and management of LUNs and volumes, multipathing and high availability, Fibre Channel cfmodes, and troubleshooting techniques.

FL-CIFSN

IBM N series Data ONTAP CIFS Administration (CIFSN)

CIFS Administration on Data ONTAP® is an instructor-led course designed for those who provide support and administration for a CIFS environment on IBM N series storage systems running the Data ONTAP operating system.

FL-NFSN

IBM N series Data ONTAP NFS Administration (NFSN)

NFS Administration on Data ONTAP® 7.3 is an instructor-led course designed for those who provide support and administration for an NFS environment on IBM N series storage systems running the Data ONTAP operating system. The course covers the NFS protocol and implementation criteria; configuration, administration, and monitoring options; and troubleshooting NFS problems.

FL-NPSAN

IBM N series Protection Software Administration (NPSAN)

Learn how to protect your mission-critical data using IBM N series® data protection software. A mixture of lecture and hands-on activities will show you how to implement SnapVault®, SnapMirror®, and SnapRestore® to protect your enterprise data from corruption and outages. Learn how to integrate Protection Manager and Provisioning Manager to enhance the manageability of your IBM N series® data protection solution.

NA-DOTF

Data ONTAP Fundamentals (DOTF)

Anyone who performs basic support and administrative functions on a NetApp® storage appliance running the Data ONTAP operating system.

NA-DOT87M

Data ONTAP 8.0 7-Mode Administration (DOT87M)

Learn about Data ONTAP® 8.0, the next generation data storage operating system from NetApp® that combines the stability of Data ONTAP 7G with the cutting-edge scalable clustering of Data ONTAP GX. Explore basic administration of a storage system running Data ONTAP 8.0 7-mode, the successor of Data ONTAP 7G. By diving deeper into administrative techniques, you will acquire the knowledge to become a successful storage administrator.

NA-CIFS

Data ONTAP CIFS Administration (CIFS)

This course is delievered using a Windows® host. The course covers the different server environments where a storage system can support Windows client users, the licensing and setting up of CIFS on the storage system, configuring files and options, administering a storage system including creating and managing shares, users, and groups, and troubleshooting CIFS problems.

NA-NFS

Data ONTAP NFS Administration (NFS)

The course will prepare students to perform in-depth support, administrative functions, and performance management for the NFS protocol on a NetApp storage system, running the Data ONTAP® operating system.

NA-SAN

Data ONTAP SAN Administration (SAN)

This course is delivered using Windows® and SUN® hosts. The course covers SAN infrastructure preparation, storage provisioning options, creation and management of LUNs and volumes, multipathing and high availability, Fibre Channel cf modes, and troubleshooting techniques.

NA-DOT8CLU

Data ONTAP 8.0 Cluster-Mode Administration (DOT8CLUSTER)

Data ONTAP 8.0 is the next generation data storage operating system from NetApp. It combines the stability of Data ONTAP 7G with the cutting-edge scalable clustering of Data ONTAP GX. In this course, you will learn the evolution of Data ONTAP clustering, understand the benefits of the product, be able to explain the architecture and functionality of a Data ONTAP cluster, and be able to install, configure, manage, and troubleshoot Data ONTAP clusters.

NA-SANIW

SAN Implementation Workshop (SANIW)

The workshop shows how to connect Windows®, vSphere™, and Linux® hosts using FC and iSCSI protocols into a NetApp® storage area network (SAN).

NA-NPSA8

NetApp Data Protection Software Administration (NPSA8)

Learn how to administer the data protection technologies that are built into Data ONTAP® 7.3 and Data ONTAP 8.0— including how to use Snapshot®, SnapRestore®, SnapVault®, Open Systems SnapVault, and SnapMirror® software to replicate and restore mission-critical enterprise data. Learn how to use the command line to manage data protection and how to use NetApp Protection Manager to automate the complexities of setting up and managing data protection. This course provides lectures and demonstration

FL-NCDABC

NCDA Boot Camp (NCDABC)

This 10-day boot camp will prepare you to pass all the NetApp exams required to achieve the NetApp Certified Data Management Administrator (NCDA)certification.

FL-ANCDABC

Accelerated NCDA Boot Camp (ANCDABC)

This 5-day intensive, advanced boot camp will prepare you for all required NetApp exams to achieve the NetApp Certified Data Management Administrator (NCDA) certification, assuming you have met the prerequisites.

NA-ANCDABC

Accelerated NCDA Boot Camp Data ONTAP 8.0 7-Mode (ANCDABC87)

Prepare for success when taking the NS0-154 NetApp® Certified Data Management 7-Mode Administrator Exam. Through lectures and labs, you will learn the essential features and functions of the Data ONTAP® 8.0 7-Mode operating system including network-attached storage administration and storage area networks configuration.

NA-PAD

Performance Analysis on Data ONTAP (PAD)

The Performance Analysis on Data ONTAP® 7.3 course provides students with the knowledge and skills to perform data collection and analysis on NetApp® storage systems. Students will learn how to interpret data and apply performance changes based on their analysis. They will use analysis data for tuning and monitoring performance.

FL-METRO

MetroCluster (METRO)

This course delivers the necessary knowledge for installation, configuration, and administration of a NetApp Fabric attached MetroCluster

FL-NAHA

High Availability (NAHA)

SyncMirror and MetroCluster to ensure continuous data availability in the enterprise and rapid recovery of data in the event of a disaster.

FL-BCON

Business Continuity (BCON)

This course combines the MetroCluster (METRO) and High Availability (NAHA) courses.

NA-OPSMGR

Operations Manager, Protection Manager, and Provisioning Manager Administration (OPSMGR)

Discover how to simplify your storage management tasks. Through lectures and labs, you will learn how to install, configure, and administer NetApp® Operations Manager 4.0, Protection Manager 4.0, Provisioning Manager 4.0, as well as Performance Advisor 4.0. By the end of this course, you will be able to successfully install, configure, and troubleshoot Operations Manager 4.0, Protection Manager 4.0, Provisioning Manager 4.0, and Performance Advisor 4.0.

NA-DSSA

DataFort Storage Security Administration (DSSA)

This instructor-led course is designed for anyone who performs basic support, and administration functions on a Decru DataFort Storage Security appliance or Lifetime Key Management appliance. Through a combination of discussion and hands-on activities, this course describes the features and functions of the DataFort E-Series (NAS & iSCSI), FC-Series (SAN Disk & SAN Tape), S-Series (SCSI Tape), Lifetime Key Management appliances and the Data Decryption Software.

NA-SANSF

NetApp SANscreen Fundamentals (SANSF)

Learn the features and functions of the SANscreen® suite of products. This hands-on course will show you how SANscreen manages and supports multiprotocol storage systems through service policies and change-planning capabilities to provide improved resource and capacity utilization. Product demonstrations will enable you to become proficient with many aspects of SANscreen. By the end of this course, you will be able to explain how SANscreen can extend data center automation to a networked storage

NA-NAVTL

NetApp VTL Administration (NAVTL)

Learn the most effective methods for NetApp® VTL configuration, installation, and troubleshooting. Explore how NetApp VTL works with the most popular storage backup solutions, including Symantec® Veritas™ NetBackup™, EMC® NetWorker®, and IBM® Tivoli® Storage Manager. Learn how to plan and execute an upgrade that will enable you to use the deduplication feature. An innovative, realworld installation case study will tie together the knowledge and hands-on experience gained in this course. Bring yo

FL-NACSA

NetApp Storage Systems & Cisco MDS Switch Administration (NACSA)

This course covers the theory and the practical side of configuring and administering an efficient and secure Storage Area Network (SAN) using Cisco MDS switches and NetApp storage systems.

FL-NABSA

NetApp Storage Systems & Brocade Switch Administration (NABSA)

This course covers the theory and the practical side of configuring and administering an efficient and secure Storage Area Network (SAN) using Brocade switches. Further topics are security aspects and analysis, correction and avoidance of malfunctions and performance issues in a SAN.

FL-VVNA

VMware vSphere on NetApp (VVNA)

This course covers the installation, configuration, and administration of an ESX/vSphere Server and focuses on optimal connectivity on NetApp Storage Systems using FCP, iSCSI, and NFS. Backup and Restore of VMware ESX/vSphere Server storage LUNs with ESX and NetApp are also covered, as is the planning and operation of VMware ESX Server and NetApp Storage Systems in a high availability scenario. Provide practical scenarios for implementing ESX/vSphere on NetApp utilizing utilities from both envir

FL-NAVMW

VMware ESX on NetApp Storage Systems (NAVMW)

This course covers the installation, configuration and administration of an ESX Servers and focuses on optimal connectivity to NetApp storage systems using FCP, iSCSI, CIFS and NFS. Backup and restore of VMware ESX Server storage LUNs with ESX and NetApp means are also covered, as is the planning and operation of VMware© ESX Server and NetApp storage systems in a high availability scenario.

NA-MSSQL

Microsoft SQL Server on NetApp Storage Systems (MSSQL)

Learn to design and implement a high-performance, highly available, consolidated Microsoft® SQL Server solution on a NetApp® storage system. This solution-based course focuses on the optimization of Microsoft SQL Server 2005 in a NetApp storage environment. This course takes you through the entire systems integration process of architecture planning, data migration, backup and restore, disaster recovery, and troubleshooting. By the end of this course, you will be able to confidently deploy Micro

NA-SME

NetApp SnapManager 5.0 for Microsoft Exchange (SME)

This solution-based course focuses on the optimization of Microsoft® Exchange 2007 in a NetApp storage environment. This course takes students through the entire system integration process of architecture planning, data migration, backup and restore, disaster recovery, clustering and troubleshooting.

NA-AHS

Architecting Hyper-V Solutions on NetApp Storage (AHS)

In this course you will learn the basics of a Hyper-V environment along with the value proposition of NetApp within that environment. The course will include discussions and activities on architecting and design specifics for Hyper-V, along with the NetApp best practices in these environments. There will also be training and activities focused on the areas of Backup and Recovery, Deduplication, Cloning, and Sizing.

NA-NAOR

Oracle on NetApp Storage Systems (NAOR)

This course covers the alternatives of running Oracle databases in a NetApp storage infrastructure. The course focuses on the relevant features of NetApp Filers, like Snapshots.

NA-DIVS

Design and Implement Virtualization Solutions on NetApp Storage (DIVS)

This course shows how to design and implement virtualization solutions on NetApp storage systems. The course first reviews the NetApp virtualization service delivery process: students learn how to use NetApp virtualization service products to engage with customers to design and implement virtualization solutions. A case study consolidates the knowledge acquired in this part of the course.

NA-AVS

Architecting VMware Solutions on NetApp Storage (AVS)

This course will cover the basics of a VMware environment and the NetApp value proposition within that environment. The course will include discussions and activities on architecting and design specifics for ESXi, Vsphere, and Desktop Management. It will also describe the NetApp best practices in these environments. There will be training and activities focused on the areas of Backup and Recovery, Deduplication, Cloning, and Sizing.

NA-ACS

Architecting Citrix Solutions on NetApp Storage (ACS)

Learn how NetApp technologies can be integrated with Citrix to provide compelling virtualization solutions. In this course, you will learn architecture, design specifics, and best practices for XenServer and XenDesktop. Through hands-on activities, you will practice creating virtual machines in a Citrix environment. By the end of this course, you will be able to demonstrate to customers that value of Citrix solutions on NetApp.

NA-DIVMW

Design and Implement VMware Solutions on NetApp Storage (DIVMW)

Learn how to use NetApp® Virtualization Service products to create virtualization solutions. This course will teach you how to deploy a VMware® virtual infrastructure on NetApp storage systems and how to achieve maximum value with VMware and NetApp integrated features.

NA-MSEXC

Microsoft Exchange on NetApp Storage Systems (MSEXC)

This solution-based course focuses on the optimization of Microsoft Exchange in a NetApp storage environment. This course takes students through the entire systems integration process of architecture planning, data migration, backup and restore, disaster recovery, and troubleshooting.

FL-VDDC

Virtual Dynamic Data Center (VDDC)

In this compact one day course the participants gain understanding for the typical competition of a Data Center. Participants get to know different solution statements and consolidation strategies and learn how to use them effectively.

FL-IESMT

Implementing Enhanced Secure Multi-tenancy Solutions (IESMT)

This highly focused 5-day course provides a detailed understanding of how to integrate NetApp MultiStore, Cisco Unified Computing Systems, Cisco Nexus 1000v switches, and VMware vSphere to create a secure multi-tenant computing environment. NetApp MultiStore serves as the storage foundation for multi-tenancy, Cisco UCS serves as the hardware platform for VMware vSphere, and Cisco Nexus 1000v serving as a virtual intelligent switch.

IP-SYW

Securing Your Web with Cisco IronPort S-Series (SYW)

This comprehensive, two-day training course covers how to install, configure, operate and maintain the S-Series. The course consists of hands-on labs, demos and presentations to help students learn technical aspects of the S-Series Web Security Appliances.

IP-SYE1

Securing Your Email with Cisco IronPort C-Series Part I (SYE1)

This comprehensive, two-day training course provides a thorough foundation on how to successfully install, configure, and administrate IronPort email security appliances. At the end of the course, attendees will possess a working knowledge of how to use IronPort email security appliances to successfully manage and troubleshoot email traffic entering and leaving the enterprise network. Attendees will also learn about Internet email concepts and standards, and will receive an overview of other pro

IP-SYE2

Securing Your Email with Cisco IronPort C-Series Part II (SYE2)

This one-day training course provides advanced information for successful configuration and operation of an Cisco IronPort email security appliance.

IP-SYEPW

Securing Your Email with Cisco IronPort C-Series, Part I and II (SYEPW)

This three-day training course provides a thorough foundation for how to successfully install, configure, and administer Cisco IronPort email security appliances

CI-CIERS1

Cisco Internetwork Expert Routing & Switching 1 (CIERS1)

The first of the two 5-day workshops includes more than 30 hours of Instructor-Led Training including lessons, hands-on labs and 16 hours of assessment labs including instructor time and feedback to provide student mentoring and support.

CI-CIERS2

Cisco Internetwork Expert Routing & Switching 2 (CIERS2)

The second of the two 5-day workshops includes more than 16 hours of Instructor Led Training, lab guide and more than 32 hours of assessment labs including instructor time and feedback to provide student mentoring and support.

FL-PAW

Packet Analysis with Wireshark Analyzer (PAW)

Participants will receive a comprehensive introduction into the features, functions and the usage of the Wireshark Analyzer and will learn methods and techniques about monitoring and analysis of their networks from the packet level.

FL-APAW

Advanced Packet Analysis with Wireshark Analyzer (APAW)

Participants will acquire knowledge and experience about detailed analysis and troubleshooting of typical network protocols and applications with specific focus on switched Ethernet, TCP/IP networks and TCP/IP based applications.

FL-PAPW

Packet Analysis Power Workshop (PAPW)

Participants will receive a comprehensive introduction into the features, functions and the usage of the Wireshark Analyzer and will learn methods and techniques about monitoring and analysis of their networks from the packet level. This course will also focus on the detailed analysis and troubleshooting of typical network protocols and applications with specific focus on switched Ethernet, TCP/IP networks and TCP/IP based applications.

FL-AWN

Analysing MS-Windows Networking (AWN)

Participants will gain knowledge about features and analysis of the key processes and network protocols of Microsoft Windows networks running Active Directory Services from a packet level perspective. With the help of the Wireshark analyzer typical network traffic is analyzed and potential problems are discussed.

FL-NWF

Networking & TCP/IP Fundamentals (NWF)

This course was developed by Fast Lane and is based on years of experience. It is tailored to network beginners interested in the challenging and exciting world of network technologies. Course topics include essential technologies, structures, functions, and data transmission methods in modern LANs and WANs. Hands-on labs offer participants the opportunity to observe network behavior with a protocol analyzer.

FL-TTCP

Troubleshooting TCP/IP Fundamentals (TTCP)

In this course participants learn to identify, correct, and avoid problems in a TCP/IP network. Participants will use a protocol analyzer.

FL-HACK

ANTI-HACKING Workshop (HACK)

LIVE hacking, attack techniques, and countermeasures: Learn all about hacker’s approaches and techniques!

FL-ACS

RADIUS and TACACS+ with the Cisco Access Control Server 5.2 (ACS)

This course teaches you how to provide secure access to your network using the Cisco® Secure Access Control Server (ACS) 5.2, interoperating with security features in Cisco IOS® Software. You will gain a thorough understanding of the operation of the Cisco Secure ACS to control access to network services and devices.

FL-SAN

Storage Foundation (SAN)

This course gives an overview of the design and concepts of storage technology as well as covering vendor specific features and protocols.

CI-PAIETVS

Implementing Express TelePresence Video Solutions (PAIETVS)

At the end of the 2 day course students will be able to install and operate a basic a simple Cisco TelePresence network.

PAIATVS1

Implementing Advanced TelePresence Video Solutions Part 1 (PAIATVS1)

The Advanced TelePresence Video Solutions Part 1 course is designed to empower the partner with the capacity to install, configure, maintain and troubleshoot a Cisco TelePresence network so that 80% of all field activity is unassisted.

CI-QOS

Implementing Cisco Quality of Service

The Implementing Cisco Quality of Service (QOS) course provides delegates with in-depth knowledge of IP QoS requirements, conceptual models using Differentiated Services (DiffServ), Integrated Services (IntServ) and Best Effort (over provisioning) and the implementation of IP QoS on Cisco IOS switch and router platforms.

CI-ICSNS

Implementing Cisco Storage Networking Solutions

This course enables the student to describe and configure the hardware and software components of the Cisco MDS 9000 product family, focusing on key technologies and features that apply to departmental, mid-range, and enterprise SANs. The ICSNS course combines MDSCT and CMSE into a single course, updated for SAN-O 2.1, 3.0, and with basic networking content added.

CI-IASNS

Implementing Cisco Advanced Storage Networking Solutions v4.2 (IASNS) (IASNS)

This course enables the student to implement advanced Cisco MDS 9000 technologies and features that apply primarily to enterprise SANs, and troubleshoot common SAN problems and configuration errors. This course merges CASI and CMSE, including updates for SAN-OS 2.1 and 3.0.

CI-DCSNS

Designing Cisco Storage Network Solutions v4.2 (DCSNS)

The course enables the student to design enterprise Cisco MDS 9000 solutions that include core Fibre Channel SANs, iSCSI for mid-range applications, and SAN extension solutions.

CI-DCNI-1

Implementing Cisco Data Center Network Infrastructure 1 (DCNI-1)

The DCNI-1 course will teach you to build scalable, reliable, and intelligent Data Center networks using Catalyst 6500 Series switches. You will deploy an efficient and expandable enterprise network using Catalyst 6500, 4900, and the Data Center Infrastructure Module of the Enterprise Composite Network Model (ECNM). Explore the capabilities and performance considerations of the Catalyst 6500 Series switch supervisor modules including Sup720-3B/BXL, Sup32-PISA, and Sup720-10G-3C/CXL.

DCUFI

Implementing Cisco Data Center Unified Fabric

Implementing Cisco Data Center Unified Fabric v4.0 is a 5-day course for those who install and implement the Cisco Nexus 7000 and 5000 Switch, and the Cisco Nexus 2000 Fabric Extender. The course covers the key components and procedures needed to install, configure, manage, and troubleshoot the Cisco Nexus 7000 and 5000 Switches in the network and SAN environment.

CI-DCNID

Data Center Network Infrastructure Design (DCNID)

This 5-Day course enables the student to create a Data Center network designs that optimizes availability, scalability, performance, and security, using the NEXUS Products, Catalyst 6500, Catalyst 4948, Firewall Services Module, Intrusion Detection Services Module, and Network Analysis Module.

CI-DCASD

Designing Data Center Application Services (DCASD)

This course will teach you how to design intelligent network services using the Catalyst 6500 Application Control Engine Service Module, the Cisco Application Control Engine Appliance, the Cisco Global Site Selector, and Cisco Wide Area Application Services.

CI-DCASI

Implementing Data Center Application Services (DCASI)

The course will cover Cisco Data Center Application Services implementation, operations, and optimization, focusing on the Cisco ACE family of products. Design intelligent network services using the Catalyst 6500 Application Control Engine Service Module, the Cisco Application Control Engine Appliance, the Cisco Global Site Selector, and Cisco Wide Area Application Services.

CI-ACESM

Implementing the Application Control Engine Service Module (ACESM)

ACESM is a 4-day, instructor-led, lecture / lab course that teaches you how to design, deploy, and optimize intelligent network services using the Cisco Application Control Engine (ACE) Service Module for Catalyst 6500 switches.

CI-DESGN

Designing for Cisco Internetwork Solutions

The Designing for Cisco Internetwork Solutions (DESGN) Course v 2.0 is a new version. In addition to general approaches and technologies for network design, it promotes Cisco solutions in designing and implementing scalable internetworks.

CI-ARCH

Designing Cisco Network Service Architectures

Building on the Designing for Cisco Internetwork Solutions (DESGN) v2.0 course, the students will learn additional aspects of modular campus and edge network design, including high availability, security, quality of service (QoS), network management, data center, and IP multicast.

CI-CWLMS

Implementing CiscoWorks LMS (CWLMS)

The course outline is as follows: 1. Describing Network Management Fundamentals 2. Introducing CiscoWorks 3. Jump-Starting CiscoWorks 4. Implementing Asset Management 5. Managing Network Connections 6. Managing Device Configurations 7. Managing Network Performance 8. Managing Faults in the Network 9. Performing System Administration.

CI-ICND1

Interconnecting Cisco Network Devices Part 1

In this comprehensive 5-day Authorized Cisco course, develop a practical understanding of the operation of modern TCP/IP networks built with Cisco hardware. Learn the commands and techniques used to troubleshoot host connections, interact with Cisco switches and routers, back up and restore configuration files, and manage network equipment.

CI-ICND2

Interconnecting Cisco Network Devices Part 2

This hands-on Authorized Cisco course builds on the foundation provided by ICND1 (Interconnecting Cisco Network Devices 1), providing a technical foundation for the rest of the Authorized Cisco curriculum. Whether your goal is to familiarize yourself with Cisco technology or to become a Cisco Certified Internetworking Expert, ICND1 and ICND2 are the place to start.

FL-CCNABC

CCNA Boot Camp

The CCNA Power Workshop is a combination of the Interconnecting Cisco Network Devices Part 1 (ICND1) and theInterconnecting Cisco Network Devices Part 2 (ICND2) class, presenting important networking fundamentals using the Open Systems Interconnect (OSI) seven layer model concepts; terminology and technologies are explained and illustrated using text and graphics animation.

CI-BGP

Configuring BGP on Cisco Routers

The Configuring BGP on Cisco Routers (BGP) course provides delegates with in-depth knowledge of BGP, the routing protocol that is one of the underlying foundations of the Internet and new-world technologies such as Multiprotocol Label Switching (MPLS).

CI-MPLS

Implementing Cisco MPLS

The course will enable learners to gather information from the technology basics to advanced VPN configuration. The focus of the course is on VPN technology issues of MPLS from the Service Providers perspective and how to configure some of those features and functions in an existing routed environment.

CI-XR12K

Advanced Services - Cisco XR 12000 Series Essentials (XR12K)

CI-CCIERSL

CCIE Advantage Routing and Switching Lab Boot Camp (CCIERSL)

CI-IINS

Implementing Cisco IOS Network Security

Implementing Cisco IOS Network Security (IINS) v1.0 is an instructor-led course presented by Cisco training partners to their end-user customers. This five-day course focuses on the necessity of a comprehensive security policy and how it affects the posture of the network.

CI-SNRS

Securing Networks with Cisco Routers & Switches

This 5 day course is aimed at providing network specialists with the knowledge and skills needed to secure Cisco IOS Routers and Switches. Successful delegates will be able to secure the network environment using existing Cisco IOS and CatOS security features, configure the 3 Primary components of the Cisco IOS Firewall Feature set (Context-Based Access Control (CBAC), Intrusion Prevention, and Authentication Proxy), implement Secure Tunnels (VPNs) using IPSec Technology and implement basic Acce

CI-SNAF

Securing Networks with ASA Fundamentals

The SNAF course is a five-day, leader-led, lab-intensive course. The course takes a task-oriented approach to teaching the skills to configure, operate, and manage Cisco Adaptive Security Appliance product family.

CI-SNAA

Securing Networks with ASA Advanced

Securing Networks with ASA Advanced (SNAA) v1.0 is a new course to replace the Cisco Secure Virtual Private Networks (CSVPN) & Securing Networks with PIX and ASA (SNPA) courses. In order to cover new features in ASA software version 8.0 and to fully cover the VPN features of the ASA, the content of SNPA was split into two courses, one that covers the fundamentals and on that covers more advanced topics.

CI-CANAC

Implementing Cisco NAC Appliance

The NAC Appliance (Cisco Clean Access) is a "shrink-wrapped" network admission control solution that recognizes users, their devices and roles; evaluates the security posture of the endpoint and scans for vulnerabilities; and enforces policy in the network.

CI-SMN

Implementing Cisco Security Manager for Cisco Networks

Cisco Security Manager is a powerful but easy to use solution to centrally provision all aspects of security policies for Cisco firewalls and VPN's. Cisco Security Manager can also cross launch to software, which is provided to manage Intrusion Prevention Systems (IPS). Management of IPS will be further integrated into Cisco Security Manager in a following release.

CI-MARS

Implementing Cisco Security Monitoring, Analysis & Response System

Cisco Systems offers the Mitigation and Response System (MARS) family of high performance, scalable appliances for threat management, monitoring and mitigation, enabling customers to make more effective use of network and security devices by combining network intelligence, context correlation, vector analysis, anomaly detection, hotspot identification and automated mitigation capabilities.

CI-IIUC

Implementing Cisco IOS Unified Communications

This 5-day course provides the student with Unified Communications concepts, component definition and high level designs.This is also the core technology course in the certification path to achieve the CCNA Voice designation. Students will be able implement and configure small to medium sized IP Telephony solutions. UC products covered during labs include the Cisco Unified Communicatons Manager Express / Cisco Unity Express and the UC500 Smart Business Communications System.

CI-IIUC2

Implementing Cisco IOS Unified Communications Part 2

This is a 5-day advanced course in implementing Cisco Unified Communications Manager Express and Cisco Unity Express systems. As a follow-on course to Implementing Cisco IOS UC Systems (IIUC), CUCME students will learn to implement CME to support SCCP and SIP endpoints. In additon Unified Messaging Gateways (UMG), and PSTN calling will be configured. Students will configure CUE voicemail networking and VPIM. Operation and troubleshooting will include tracing and debugging of CME, CUE and UMG.

CI-CVOICE

Cisco Voice over IP (CVOICE)

Cisco Voice over IP (CVOICE) v6.0 provides an understanding of converged voice and data networks and also the challenges faced by the various network technologies. The course also provides network administrators and network engineers with the knowledge and skills required to integrate gateways and gatekeepers into an enterprise VoIP network.

CI-CIPT1

Implementing Cisco Unified Communications IP Telephony Part 1 (CIPT1)

Implementing Cisco Unified Communications IP Telephony Part 1 (CIPT1) v6.0 prepares you for installing and configuring, a Cisco Unified Communications Manager solution in a single site. This course focuses primarily on Cisco Unified Communications Manager Release 6.0, the call routing and signaling component for the Cisco Unified Communications solution.

CI-CIPT2

Implementing Cisco Unified Communications Manager Part 2

Implementing Cisco Unified Communications IP Telephony Part 2 (CIPT2) v6.0 prepares you for installing and configuring, a Cisco Unified Communications Manager solution in a multisite environment. This course focuses on Cisco Unified CallManager Release 6.0, the call routing and signaling component for the Cisco Unified Communications solution.

CI-TUC

Troubleshooting Cisco Unified Communications Systems (TUC)

Troubleshooting Cisco Unified Communications Systems (TUC) v1.0 equips network professionals with the knowledge and skills required to troubleshoot Unified Communications Systems / solutions in Enterprise, Mid-Market, and Commercial deployments. TUC teaches troubleshooting methodology, triage, resources, tools and fixes at the integrated System / Solution level, and for components (such as Cisco Unified Call Manager, Cisco Unity, videoconferencing, and infrastructure).

CI-UCAD

Cisco Unified Communications Architecture and Design (UCAD)

The Cisco Unified Communications Architecture and Design course addresses the breadth of technical issues surrounding the design of Voice over Data networks and explains a methodology that brings order to approaching the problems faced by planners and designers. It teaches the assessment of the current network, Cisco methodology for implementing Voice over Data networks, and how to design sustainable and appropriate implementations.

CI-UCCXD

Unified Contact Center Express and Unified IP IVR Deployment (UCCXD)

This course provides knowledge and hands-on deployment experience for Unified Contact Center Express and Unified IP IVR. Deployment tasks include planning, installation, configuration, administration, script development, agent and supervisor deployments and troubleshooting.

CI-IUWNE

Implementing Cisco Unified Wireless Networking Essentials (IUWNE)

The goal of the IUWNE v1.0 is to provide students with information and practice activities to prepare them to help design, install, configure, monitor and conduct basic troubleshooting tasks of a Cisco WLAN in SMB and Enterprise installations.

CI-CWLF

Cisco Wireless LAN Fundamentals (CWLF)

This course examines the fundamentals of Cisco`s wireless LAN technology. Topics will include the concepts of autonomous and lightweight access points and controllers, network management solutions and security. After completing this course, delegates will be able to discuss configuration, management of both autonomous and lightweight wireless networks.

CI-CWLAT

Cisco Wireless LAN Advanced Topics (CWLAT)

This course is designed to give delegates a firm understanding of the components, features and proper deployment of the Cisco Unified Wireless Network.

CI-CUWN

Cisco Unified Wireless Networking (CUWN)

CUWN 4.1 is based on Lightweight access points, Controllers and the Advanced Feature Set. This course enables a network administrator to deploy a WLAN Enterprise solution through the identification and successful implementation of site-appropriate hardware and software features in a Cisco Unified Wireless Network.

CI-CWMN

Cisco Wireless Mesh Networking (CWMN)

Cisco Wireless Mesh Networking (CWMN) is an instructor-led course, training partners to their end-user customers. This three-day course focuses on using Cisco Unified Wireless solution, to design, install and maintain a wireless mesh network both as an add-on to an existing wireless LAN and as a new installation. Upon completion of this training course, you will be able to select, connect, configure, and troubleshoot the different components of the Cisco Wireless Mesh Network

CI-IPS 7

Implementing Cisco Intrusion Prevention System

This course is focused on arming the Network Security Engineer (NSE) with the fundamentals of configuring network Intrusion Prevention Systems (IPSs), with a focus on implementing this on Cisco IPS devices. The NSE will benefit from receiving the fundamentals within the context of a hands-on immersion into doing IPS design and administration on real Cisco IPS devices.

CVOICE 8

Implementing Cisco Unified Communications Voice over IP and QoS

Implementing Cisco Voice Communications and QoS (CVOICE) v8.0 teaches learners about voice gateways, characteristics of VoIP call legs, dial plans and their implementation, basic implementation of IP phones in Cisco Unified Communications Manager Express environment and essential information about gatekeepers and Cisco Unified Border Element. The course provides the learners with voice-related QoS mechanisms that are required in Cisco Unified Communications networks.

CIERS1

Cisco Internetwork Expert Routing & Switching 1

The first of the two 5-day workshops includes more than 30 hours of Instructor-Led Training including lessons, hands-on labs and 16 hours of assessment labs including instructor time and feedback to provide student mentoring and support.

CI-CIPT1 8

Implementing Cisco Unified Communications Manager, Part 1

Implementing Cisco Unified Communications Manager, Part 1 (CIPT1) v8.0 prepares you for implementing a Cisco Unified Communications Manager solution at a single-site environment. This course focuses primarily on Cisco Unified Communications Manager version 8.0, which is the call routing and signaling component for the Cisco Unified Communications solution.

CI-CIPT2 8

Implementing Cisco Unified Communications Manager, Part 2

Implementing Cisco Unified Communications Manager, Part 2 (CIPT2) v8.0 prepares you for implementing Cisco Unified Communications solution in a multisite environment. It covers globalized call routing, Cisco Service Advertisement Framework (SAF) and Call Control Discovery (CCD), tail-end hop-off (TEHO), Cisco Unified Survivable Remote Site Telephony (SRST), and mobility features such as Cisco Device Mobility and Cisco Extension Mobility.

CI-FIREWAL

Deploying Cisco ASA Firewall Features

This course is focused on arming the Network Security Engineer (NSE) with the fundamentals of configuring network firewalls, with a focus on implementing this on Cisco ASA devices. The NSE will benefit from receiving the fundamentals within the context of a hands-on immersion into doing firewall design and administration on real Cisco ASA devices.

CI-IAUWS

Implementing Advanced Cisco Unified Wireless Security

Implementing Advanced Cisco Unified Wireless Security (IAUWS) v1.0 is a five-day day instructor-led course, designed to help students prepare for the CCNP® wireless certification, a professional-level certification specializing in the wireless field. The goal of the course is to provide network professional with information to prepare them to secure the wireless network from security threats via appropriate security policies and best practices, as well as ensure the proper implementation of secu

CI-IP6FD

IPv6 Fundamentals, Design & Deployment

The IPv6 Fundamentals, Design and Deployment v2.0 course is a five-day, instructor led training course that combines the IPVSF v1.1 and IPVSD with no overlap. IP6FD v2.0 provides baseline through advanced technical information and training on the next-generation Internet protocol, IPv6. The goal of this course is to prepare the learner for transitioning to IPv6 based networks.

CI-IUWMS

Implementing Cisco Unified Wireless Mobility Services

The Implementing Cisco Unified Wireless Mobility Services is a 5 day ILT course, designed to help students prepare for the CCNP-Wireless certification, a professional level certification specializing in the wireless field. The IUWMS course is a component of the proposed CCNP-Wireless curriculum. The IUWMS course is designed to give students a firm understanding of how to integrate mobility services into the network; tune and troubleshoot the WLAN and implement indoor enterprise mesh networks. Th

CI-IUWVN

Implementing Cisco Unified Wireless Voice Networks

The Implementing Cisco Unified Wireless Voice Networks (IUWVN) v1.0 course is a 5 day ILT course. The IUWVN course is designed to give students a firm understanding of how to integrate VoWLAN services into the WLAN and be able to implement VoWLAN, QoS, and high-bandwidth applications into the wireless network. The IUWVN training class reinforces the instruction by providing students with hands-on labs.

CI-MCAST

Implementing Cisco Multicast

Implementing Cisco Multicast provides students with in-depth knowledge of the IP multicast building blocks that make this new IP service deployable and attractive from a business perspective. Bandwidth and processing power are wasted when data is replicated and sent from a source to potential receivers multiple times. With IP multicast and a sophisticated group of protocols, the information is delivered with minimal impact on bandwidth and processor load. This IP service ensures simultaneous inf

CI-MPLST

Implementing Cisco MPLS Traffic Engineering & Other Features

The Implementing Cisco MPLS Traffic Engineering and Other Features (MPLST) course is recommended training for individuals seeking advanced MPLS based knowledge and skills.

CI-ROUTE

Implementing Cisco IP Routing

This ROUTE course is designed to provide professionals of medium-to-large network sites with information on the use of advanced routing in implementing scalability for Cisco routers that are connected to LANs and WANs. The goal is to train professionals to dramatically increase the number of routers and sites using these techniques instead of redesigning the network when additional sites or wiring configurations are added. The ROUTE training reinforces the instruction by providing learners with

CI-SECURE

Securing Networks with Cisco Routers and Switches

This course is focused on arming the "Network Security Engineer (NSE)" with the fundamentals of configuring security services based on Cisco IOS Software. The NSE will benefit from receiving the fundamentals within the context of a hands-on immersion into implementing se-curity at the IOS level, providing a hardened and protective infrastructure.

CI-TSHOOT

Troubleshooting and Maintaining Cisco IP Networks

Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) v1.0 is a five-day course designed to help network professionals hone the skills and knowledge needed to maintain their network and to diagnose and resolve network problems quickly and effectively. It also assists the network professional in preparing for Cisco CCNP certification. The TSHOOT course is a component of the CCNP curriculum.

CI-TVOICE8

Troubleshooting Cisco Unified Communications

Troubleshooting Cisco Unified Communications (TVOICE) v8.0 prepares network professionals with the knowledge and skills that are required to troubleshoot Cisco Unified Communications systems and solutions in enterprise, midmarket, and commercial deployments in single-site and multisite environments. The course teaches troubleshooting methodology, triage, resources, tools, and fixes at the integrated system or solution level for Cisco Unified Communications Manager.

CI-VPN

Deploying Cisco ASA VPN Solutions

This course is focused on arming the Network Security Engineer (NSE) with the fundamentals of configuring network Virtual Private Networks (VPNs), with a focus on implementing this on Cisco ASA devices. The NSE will benefit from receiving the fundamentals within the context of a hands-on immersion into doing VPN design and administration on real Cisco ASA devices.

FL-CASPW

Cisco ASA Specialist Power Workshop

The Cisco ASA Power Workshop comprises the following courses: Securing Networks with ASA Fundamentals (SNAF) and Securing Networks with ASA Advanced (SNAA).

PAIATVS2

Implementing Advanced TelePresence Video Solutions Part 2 (PAIATVS2)

Recognize the MSE 8000 chassis and the corresponding blades available including their function.

CI-PAITVIS

Installing TelePresence Video Immersive Solutions (PAITVIS)

The Installing TelePresence Video Immersive Solutions course is designed to empower the partner with the capacity to install, configure, maintain and troubleshoot a Cisco TelePresence Immersive solution so that 80% of all field activity is unassisted.

CI-TPBOOT

TelePresence Boot Camp (TPBOOT)

The TelePresence Power Workshop is a five-day, instructor-led course designed to help you prepare for the Cisco TelePresence Solutions Specialist certification, a professional-level certification for those specializing in the Cisco TelePresence field. The course provides a complete solution for the Cisco TelePresence Solutions Specialist curriculum. The course will provide you with a firm understanding of installation to ongoing management. The TelePresence Power Workshop reinforces the instruct

CI-CCNAX

Interconnecting Cisco Network Devices: Accelerated (CCNAX)

Interconnecting Cisco Networking Devices: Accelerated (CCNAX) v1.0 is a 60-hour instructor-led course that provides students with the knowledge and skills necessary to install, operate, and troubleshoot a small to medium-sized network, including connecting to a WAN and implementing network security.

FL-CPT

Cisco Professionals Troubleshooting (CPT)

Participants will be imparted the required know-how for successful troubleshooting in complex multiprotocol environments with Cisco routers and switches. Theoretical knowledge is deepened in a hands-on manner in a lab environment with real equipment. Based on typical fault scenarios the participants learn how to systematically diagnose and remove upcoming network problems at the different OSI layers.

FL-CCNPPW

CCNP Power Workshop (CCNPPW)

The CCNP Power Workshop provides accelerated preparation for Cisco certification in the shortest possible time. Training is intensive, with instruction ranging up to twelve hours daily on demand.

CI-RSSSE

Routing & Switching Solutions for System Engineers (RSSSE)

The Routing and Switching Solutions for Systems Engineers course teaches delegates how to plan activities that provide a technical description of solutions presented to customers and point out specific advantages of selecting Cisco solutions as part of a System Engineer and Field Engineer team effort.

CI-ARSFE

Advanced Routing & Switching for Field Engineers (ARSFE)

Advanced Routing and Switching for the Field Engineer will prepare the learner for the implementation of the design solution as part of a System Engineer and Field Engineer effort, to install and configure the solution in the customer's network so that the customer accepts the solution, and to enable the customer's network operation and the administration of the integrated solution in monitoring baseline performance and managing abnormal incidents or problems.

FL-MEWS

MPLS Expert Workshop (MEWS)

FL-CAT6KS

Advanced Cisco Catalyst 6500 Switching (CAT6KS)

The CAT6KS course enables customers to build scalable, reliable, and intelligent Data Center and Campus networks using Catalyst 6500 Series switches with updated content that aligns with the current Catalyst 6500 enterprise solutions. CAT6KS also provides advanced switching training to supplement the SWITCH CCNP Switching Class and provides a design-concept module focused on the Catalyst 6500 features that differentiate the Catalyst 6500 as a solution for next-generation Data Center and Campus n

FL-CCIET

CCIE Routing & Switching Theory Workshop (CCIET)

Recertification of the CCIE-Status is needed after two years. This 5-day Workshop will refresh and enhance your knowledge focusing on the key areas required in preparation for the CCIE Routing and Switching Certification/Recertification. This course provides accelerated preparation for all relevant subjects in the shortest possible time.

FL-FWSMD

Catalyst 6500 and Cisco 7600 Series Routers Firewall Services Module Deployment (FWSMD)

In this course the students will learn how to configure and initialize the Firewall Services Module (FWSM). Other topics include IP Routing, Cisco Modular Policy Framework, Cisco Adaptive Security Device Manager, Authentication, Authorization & Accounting and the Cisco Security Manager (CSM).

CI-SPQOS

Designing Service Provider Cisco Quality of Service (SPQOS)

This four-day leader-led class enables learners to use the technology principles of basic Quality of Service, and Quality of Service with Multi Protocol Label Switching (MPLS), to implement advanced features and functions. The focus of the course is on best practices for implementing QoS from the Service Providers perspective, and strategies for deploying some of those features and functions in an existing SP environment.

CI-NAC

Implementing Cisco Network Admission Control (NAC)

Network Access Devices (NADs) Switch (layer 2): NAC Phase 2 Network devices that enforce admission control policy on switches. This devices demand host security "credentials" and relay this information to policy servers, where network admission control decisions are made. Based on customer-defined policy, the network will enforce the appropriate admission control decision permit, deny, quarantine, or restrict.

CI-DDOS

Mitigating DDoS Using Cisco Guard & Traffic Anomaly Detector (DDOS)

Mitigating DDoS Using Cisco Guard and Traffic Anomaly Detector (DDOS) v1.0 is an introductory end-user course focused on basic deployment and configuration of the Cisco Guard (Guard) and Cisco Traffic Anomaly Detector (Detector) distributed denial of service (DDoS) mitigation solutions. Upon completion of the course, learners will be able to recognize threats posed by DDoS attacks, select the appropriate mitigation strategies, and successfully deploy Cisco DDoS mitigation solutions. The course i

CI-SSSE

Security Solutions for System Engineers (SSSE)

This course covers claims and evidence identified for the new Advanced Security SE Specialisation. The Security Solutions for Systems Engineers training is part of the Channel SE program. The SSSE course will form the basis for the Security Cisco Qualified Specialist certification.

FL-AIPSEC

Advanced IPSec (AIPSEC)

This course focuses on providing the skills and knowledge necessary to deploy IPSec VPNs with Cisco IOS. The course covers technical basics (encryption algorithms), standards (IKE, IPSec) as well as advanced features such as PKI-Integration, DMVPN and GET VPN. Cisco IOS Version of this course is 12.4T.

CI-DPS

Designing Perimeter Security (DPS)

This course teaches the knowledge and skills needed to design secure network perimeters. The focus is on providing connectivity and access control enforcement solutions on network boundaries. The course identifies, compares and explains NAT technologies (both basic and advanced) and advanced NAT design.

FL-CCNPSEC

CCNP Security Blended Learning Boot Camp (CCNPSEC)

Fast Lane’s Blended Learning CCNP Security Boot Camp is an intensive 12-day training and certification program for Network Security Engineers intent on the CCNP Security certification.

CI-CUDN

Cisco Unity Design & Networking (CUDN)

Cisco Unity Design and Networking (CUDN) is an advanced course for engineers responsible for the design of sustainable complex Unity solutions based upon customer requirements. Upon completion of this course, you should have a higher degree of confidence that the designs you provide for your customers meet the criteria of being sustainable and reducing post-deployment support requirements.

FL-CCNPVPW

CCNP Voice Power Workshop (CCNPVPW)

The 15-day CCNP Voice Power Workshop provides accelerated preparation for the qualification to become an IP Communications specialist. Our specialists offer an intensive training up to 11 hours daily about all essential content concerning IP Telephony. The purpose of this workshop is to prepare for the CCNP Voice (Cisco Certified Professional Voice) certification.

CI-UCM70

Implementing Cisco Unified Communications Manager V 7.0 Features (UCM70)

Implementing Cisco Unified Communications Manager Version 7.0 Features (UCM70) is designed to provide learners with necessary knowledge and skills to install and upgrade Cisco Unified Communications Manager version 7 and to implement the new features introduced with this new release in large, multisite Cisco Unified Communications Manager deployments.

CI-IUM

Implementing Cisco Unified Messaging (IUM)

Implementing Cisco Unified Messaging (IUM) v5.0, formerly Cisco Unified Communications System Engineer (UCSE) provides students with best practice information on how to administer, install, configure, operate, and maintain a Cisco Unity system in either a stand-alone voice mail or unified messaging environment, as well lessons on Cisco Unity Connection.

CI-ACUCM

Administering Cisco Unified Communications Manager (ACUCM)

Administering Cisco Unified Communications Manager (ACUCM) v7.0 provides system administrators and networking professionals with an understanding of the Cisco Unified Communication Manager System from a Level One support perspective. ACUCM teaches the concepts of IP telephony using the Cisco Unified Communication Manager server, including its function, features, and configuration.

CI-AUM

Administering Cisco Unified Messaging (AUM)

The aim of the Administering Unified Messaging (AUM) v5.0 course is to produce competent administrators of the Cisco Unity product v5.0 and later. By the end of this course, learners will be able to perform system setup and customization; add, delete, and modify subscribers; and monitor and maintain the Cisco Unity system. The class partially prepares a learner to take the Unified Communication for System Engineers exam (642-105).

CI-IUCS

Implementing Unified Communications Security (IUCS)

Implementing Unified Communications Security (IUCS) v1.0 prepares you for installing, configuring, and maintaining security on a Cisco Unified Communication solution. This 5-Day course focuses primarily on enabling security on Cisco Unified CallManager 5.0 and its components and applications.

CI-IUC

Implementing Cisco Unity Connection (IUC)

This course is designed to provide the learner with the knowledge to implement, integrate, and administer and manage Cisco Unity Connection release 7.0.

CI-CUCPD

Cisco Unified Communications Presales & Design (CUCPD)

CI-PRSDI

Cisco Unified Presence Design and Implementation (PRSDI)

Cisco Unified Presence Design and Implementation (PRSDI) v6.0 is a 3-Day course that prepares you for installing and configuring a Cisco Unified Presence Release 6.0. It also includes integration options with other Cisco Unified Communication products as well as third-party presence solutions, including Microsoft Live Communication Server, Microsoft Office Communications Server, and IBM Lotus Sametime. Finally it presents deployment and maintaining options.

CI-HMGCO

High-density Media Gateway Configuration & Operations (HMGCO)

The High-Density Media Gateway Configuration and Operation (HMGCO) course version 1.5 is a lecture-lab course focusing on the implementation of the MGX 8880 and MGX 8850-PXM45 Media Gateways (MGX-MG), based upon the Voice Switch Service Module (VXSM) in both switched VoIP and VoAAL2 trunking applications.

CI-IMPS

Implementing Cisco Unified MeetingPlace Solutions (IMPS)

The course is a five-day instructor-led technical course providing in-depth coverage of how to install and configure the functional components of the Cisco MeetingPlace product in several deployment models in an enterprise customer network. Learners become familiar with the inter-communication of key system components, system installation and configuration, troubleshooting, monitoring and debugging. Knowledge is reinforced by hand-on labs.

CI-DMPS

Designing Cisco Unified MeetingPlace Solutions (DMPS)

DMPS is a three-day instructor-led technical course that reviews and enforces the system architecture of MeetingPlace and how those components integrate into an enterprise network. Use of the MeetingPlace Configuration Tool and other tools in case studies and design scenarios will be emphasized to create solutions that meet common customer MeetingPlace deployment requirements.

CI-CAPPS 8

Integrating Cisco Unified Communications Applications (CAPPS 8)

Integrating Cisco Unified Communications Applications (CAPPS) v8.0 teaches you the integration options of Cisco Unified Presence, Cisco Unity Express, and Cisco Unity Connection. It describes voice messaging deployment scenarios, Cisco Unified Presence features, and troubleshooting mechanisms as well as Cisco Unified Presence and Cisco Unified Personal Communicator integration options with Cisco Unified Communications Manager.

CI-ICOMM 8

Introducing Cisco Voice and Unified Communications Administration (ICOMM 8)

This course introduces the architecture, components, functionalities, and features of Cisco Unified Communications solutions and describes how daily job tasks, such as system monitoring, moves, adds, and changes are performed on Cisco Unified Communications Manager, Cisco Unified Communications Manager Express, Cisco Unity Connection, and Cisco Unified Presence.

FL-CUCCPW

Cisco Unified Contact Center Power Workshop (CUCCPW)

This Power Workshop is intended for personnel who will implement, configure and support the Cisco IPCC Product.

CI-UCCXA

Covering advanced techniques in scripting and overall CRS functionality (UCCXA)

Building on the knowledge base and scripting experience learned in CRSD / UCCXD classes, this course covers advanced techniques in scripting and overall CRS functionality. During this four day class students implement such things as extending the functionality of UCCX using many of the tools that are already available in the premium version of the product.

CI-UEIME

Implementing Cisco Unified E-Mail and Web Interaction Manager Enterprise (UEIME)

Cisco Interaction Manager provides the capability for agents to selectively handle E-Mail, chat, web collaboration, and voice requests using an integrated platform for task assignment using workflow conditions, routing scripts, and socket communication involving Cisco Unified Contact Center Enterprise 7.5 (Unified CCE), with accessibility and interoperability of both within the Cisco Agent Desktop (Cisco AD) Embedded Browser.

CI-CVPI

Customer Voice Portal Implementation (CVPI)

The Cisco Unified Customer Voice Portal Implementation (CVPI) v7.0 course defines the tasks necessary for the operation, administration, management, and provisioning of Cisco Unified Customer Voice Portal (CVP) as it is installed in a comprehensive Cisco Unified Intelligent Contact Management (ICM) Enterprise environment.

FL-CNOW

Cisco Nexus Overview Workshop (CNOW)

This Workshop helps you in getting an understanding on how to successfully make the most of the new Cisco Nexus switch family technologies to optimize the scalability, performance and efficiency of your Data Center.

FL-DCAO

Cisco Data Center 3.0 Architectural Overview (DCAO)

This one-day class focuses on the Cisco Data Center Architecture and the products and services available. The courseware includes instructor-led presentations designed to build immediate awareness of the features and benefits available in the Cisco Data Center.

DCNX1K

Implementing the Cisco Nexus 1000V

This new Authorized Cisco course, Implementing the Cisco Nexus 1000V, focuses on the key features of the Cisco Nexus 1000V Switch and how these features are used in the data center virtual infrastructure design.

DCNX5K

Implementing the Cisco Nexus 5000 and 2000

Implementing the Cisco Nexus 5000 and 2000 v1.0 course is a 5-day course designed for systems and field engineers, Consulting Systems Engineers, Technical Solutions Architect and Cisco Integrators/Partners who install and implement the Cisco Nexus 5000 switch. The course focuses on the key components and procedures needed to install, configure, manage and troubleshoot the Cisco Nexus 5000 switch in the network and SAN environment.

DCNX7K

Implementing the Cisco Nexus 7000

This course is a 5-day ILT training program designed for systems and field engineers who install and implement the Cisco Nexus 7000 Switch. This course covers the key components and procedures you need to know to install, configure, manage and troubleshoot the Cisco Nexus 7000 Switch platform.

FL-WNNDC

What´s New vSphere 4.0 on Nexus 1000V Data Center Networks (WNNDC)

This highly focused, 4-day course provides a detailed understanding of the features and protocols supported by the Nexus 1000V product family and explores new features in VMware® vCenter Server and ESX™/ESXi, as well as how to upgrade an ESX 3.X environment. The Cisco Nexus™ 1000V Series Switches are virtual machine access switches that are an intelligent software switch implementation for VMware vSphere environments.

FL-ICMNDC

Install, Config and Manage vSphere 4 on Nexus 1000V Data Center Networks (ICMNDC)

This highly focused, 5-day course provides a detailed understanding of the emerging features and protocols supported by the Nexus 1000V product family and installation configuration, and management of VMware® vSphere™. The Cisco Nexus™ 1000V Series Switches are virtual machine access switches that are an intelligent software switch implementation for VMware vSphere environments.

FL-FCOE

Fiber Channel over Ethernet Overview (FCOE)

Fiber Channel over Ethernet Overviewv 1.0 is a 2 day Fast Lane Workshop. This Workshop provides an understanding on the FCoE technology as available today, design and cost con-siderations, virtualization, and future plans.

FL-CCIESAN

CCIE Storage Networking Power Workshop (CCIESAN)

This ten-day Power Workshop is an intensive trainingprogram für future Cisco MDS 9000 experts and teaches the students a deep technical understanding for the implementation, the configuration and the management of the Cisco MDS 9000 series. The Workshop is the first step towards the CCIE Storage Networking certification.

CCIESANPL

CCIE Storage Networking Power Lab (CCIESANPL)

The CCIE Storage Networking Power Lab is an intensive, hands-on course which prepares the students for the challenging CCIE Storage Networking Lab exam.

FL-DCDW

Data Center Discovery Workshop (DCDW)

This course is designed for Cisco Account Managers and Partner Account Managers who work in the Enterprise or Commercial Data Center markets.

CI-CMSS

Cisco Mainframe Storage Solutions (CMSS)

This course is designed for storage networking professionals who need to implement FICON storage networks using the Cisco MDS 9000 switches. The course covers storage & channel terminology in a mainframe environment, along with detailed coverage of FICON protocols. Upon completion of the class, the students will be able to fully configure a MDS 9000 switch for FICON support, including basic configuration steps, CUP configuration, cascaded directors, and Fibre Channel-over-IP (FCIP) support.

FL-CSDC

Cisco Sales Data Center (CSDC)

CI-ACEDES

Designing an Enterprise Application Infrastructure with the ACE Family (ACEDES)

ACEDES is a 4-day, instructor-led, lecture / lab course. You will learn how to deploy and configure intelligent network services using the Catalyst 6500 Application Control Engine (ACE), the next generation form factor of ACE, GSS and AVS. This course covers all of the key features of the ACE products, including resource virtualization and management, server load balancing (Layer 2-4 and Layer 7), SSL termination and offload, and security features like application-layer inspection and fixups.

CI-ACEAP

Cisco Application Control Engine Appliance (ACEAP)

ACEAP is a 4-day, instructor-led, lecture / lab course that teaches you how to design, deploy, and optimize intelligent network services using the Cisco Application Control Engine (ACE) Appliance.

CI-GSSOC

Global Site Selector Operation & Configuration (GSSOC)

GSSOC is a 3-day, instructor-led, lecture / lab course that teaches you how to design in and deploy the Cisco Global Services Switch (GSS) 4492R to load balance multiple Data Centers. Students will learn how to design, deploy, and configure advanced network load balancing services using the GSS with the Cisco GSS Version 1.3 software.

CI-CSSOC

Content Services Switch Operation & Configuration (CSSOC)

The four-day operation and configuration class provides customers with intensive hands-on training using Cisco 11500 Series Content Services Switch and Content Switching Module for Cisco Catalyst 6500 Series Switch. This course is intended for a technical audience involved in the installation, configuration and maintenance of content switching products. Customized training is available to emphasize the specific requirements of the customer's network and business demands.

CI-ACNS

Application & Content Networking System Operation & Configuration (ACNS)

This 4 day technical course provides an intensive lecture and hands-on training experience with Cisco's Application and Content Networking System 5.1 products. This course is intended for technical audiences involved in the installation, configuration and maintenance of Cisco's ACNS products. The class format will alternate between lectures, whiteboard discussions, and hands-on lab exercises.

CI-ACEWS

ACE Workshop (ACEWS)

In this course, you will learn how to design intelligent network services using the Catalyst 6500 Application Control Engine (ACE) Service Module and the Cisco ACE 4710 Appliance.

CI-CUWDT

Cisco Unified Wireless Solutions - Deploying and Troubleshooting v1.0 (CUWDT)

This five-day course focuses on using Cisco Unified Wireless solutions, from initial site survey to deployment, management and troubleshooting. It is a combination of the existing CWLF and CWLAT courses but the content has been updated to include the current software release (7.x) as well as a number of topics related to the Cisco Borderless Networks Architecture.

FL-CCIEWW

CCIE Wireless Written Bootcamp (CCIEWW)

The Cisco CCIE Wireless Written Power Workshop is a five-day course focusing on using Cisco Unified Wireless solution. This intensive bootcamp is designed to give students a firm knowledge of the theoretical background needed to successfully pass the CCIE Wireless Written exam.

FL-CCIEWL

CCIE Wireless Lab Bootcamp (CCIEWL)

This five-day course focuses on using Cisco Unified Wireless solution. This intensive bootcamp is designed to give students a firm knowledge and lab training practice needed to successfully pass the CCIE Wireless lab exam. This class is heavily focused on lab training and practice. Each student works on an independent rack offering all the features that may be to be configured in the real lab exam. The course is 90% practice based, offering summaries of the main points of the technology to maste

CI-DRFN

Designing Cisco RF Networks (DRFN)

To effectively design a wireless mesh network, it is necessary to understand RF concepts, antenna systems capabilities, and link design measurements. Several options exist that could make the wireless mesh design a success or a failure. In this 3 day course, you will learn about the design, installation, and standards of a wireless mesh network both as an add-on to an existing WLAN and as a new installation.

CI-WMRFPW

Cisco Wireless Mesh & RF Design Power Workshop (WMRFPW)

This 5-day Course combines the two courses Cisco Wireless Mesh Networking (CWMN) and Designing Cisco RF Networks (DRFN). In one week of training, students will learn how to design, install, and maintain a wireless mesh network as well as select, connect, configure, and troubleshoot Cisco components of their wireless mesh network. In an in-class case study, they will gain experience designing the RF network for a sample mesh-served community, engineering the client access layer, the mesh layer, a

CI-TPICT

TelePresence Installation and Configuration Training (TPICT)

This course is designed to give learners a firm understanding of installation to ongoing management as well as the physical installation of Cisco TelePresence units. The Physical Installation and Implementation of Cisco Telepresence Solutions class reinforces the instruction by providing learners with hands-on labs.

CI-DMS

Digital Media Systems (DMS)

After completing this course, students will have a thorough understanding of the Cisco Digital Media Suite (DMS) with hands on ability to install, configure and troubleshoot the Digital Media Suite including Show and Share, Digital Signs and Cisco Cast. Through instructor led training and lab reinforcement with the MXE 3500, students will also be able to publish dynamic live & on-demand content for Show and Share and configure Digital Media Players with the use of Digital Media Manager.

CI-ADS

Cisco Academy of Digital Signage (ADS)

Cisco Academy of Digital Signage (ADS) is a 2-day innovative education initiative that teaches media professionals how to create and optimize media content for digital signage. Cisco ADS provides an instructor-led course to help develop the skills needed to produce digital signage for every market and customer.

FL-OTF

Optical Technologies Fundamentals (OTF)

The Introduction to Optical Technologies (IOT) course provides the students with fundamental knowledge about optical technologies and components of optical systems. The course enables the students to learn the basics of light and fiber optics and to distinguish between different fiber types.

MSTP BASIC

Cisco ONS 15454 Multiservice Transport Platform (MSTP) Release 9.0 Basic (MSTP BASIC)

The Cisco Systems ONS 15454 Multiservice Transport Platform (MSTP) takes full advantage of the network intelligence introduced by the ONS 15454 Multiservice Provisioning Platform (MSPP) to deliver intelligent dense wavelength-division multiplexing (DWDM) functions for metropolitan and regional networks.

MSTP DATA

Cisco ONS 15454 Multiservice Transport Platform(MSTP) Release 9.0 Implementing Data over DWDM (ONS Data) (MSTP DATA)

This lab-intensive course introduces you to the Cisco® ONS 15454 Multiservice Transport Platform (MSTP) dense wavelength-division multiplexing (DWDM) Release 8 data features and functions.

MSTP ADV

Cisco ONS 15454 Multiservice Transport Platform (MSTP) Release 9.0 Advanced (MSTP ADVANCED)

This course is intended for network professionals responsible for installation, deployment, and maintenance of the Cisco ONS 15454 MSTP. Network operations personnel, planners, and designers will also benefit.

CI-OCTMO

CTM Operation & Maintenance (OCTMO)

The Cisco Transport Manager (CTM) Operation and Maintenance course enables the student to use the CTM network management system to manage a variety of Cisco optical networking products from the Cisco 15000 family.

CI-OSTPO

Cisco ONS 15454 SDH Turn Up, Test, Provisioning & Operation (OSTPO)

The Cisco ONS 15454 SDH is a fast and powerful, yet easy to use optical platform that lowers the cost and increases the efficiency of bandwidth delivery within optical transport networks. The Cisco ONS 15454 SDH Provisioning and Operation Training provides instructor-led training that enables the student to learn how to operate the ONS 15454 SDH through classroom instruction and hands-on training on an ONS 15454 SDH system.

CXS-202-1l

Citrix XenServer 5.6 Administration

Lär dig att konfigurera och administrera en Citrix Xen Server 5.6 och Citrix Provisioning 5.6 lösning. Du kommer också att få använda XenMotion för att automatiskt flytta en virtuell maskin samt skapa, tilldela och administrera virtuella diskar. Dessutom lär du dig att konfigurera en Provisioning Services för utrullning av operativsystem till både fysiska och virtuella maskiner.

CXD-202-1

Citrix XenDesktop 5 Administration

Lär dig att centralisera/managera desktops i datacentret och leverera dem som en tjänst till användare oavsett var de befinner sig. Du lär dig hur man väljer leveransmodell för olika användargrupper beroende på behov, hur man bygger Proof-Of-Concepts och XenDesktop-miljöer. Vidare ingår hur man tilldelar användare virtuella desktops och skräddarsyr dem med hjälp av policys.

CXA-206-1

Basic Administration for Citrix XenApp 6.5

Basic Administration för Citrix XenApp 6.5 ger grundläggande och nödvändig kunskap för att effektivt centralisera och managera applikationer i datacentret och omedelbart leverera dem som en tjänst till användare var som helst. Deltagarna på kursen kommer att få utbildning i att installera XenApp 6.5 och dess insticksmoduler för Windows Server 2008 R2 genom hands-onövningar liksom lära dig hantering av administrationskonsoler och verktyg för att konfigurera resurser, policys, servrar och serverfa

CXA-205-1

Basic Administration for Citrix XenApp 6.0 Skills Update

Basic Administration för Citrix XenApp 6.0 Skills Update är en uppdatering av Presentation Server, XenApp 4.5 och XenApp 5 för Windows Server 2008. Kursen ger en överblick i de nya funktionerna för en effektiv administration av XenApp 6.0 för Microsoft Windows 2008.

CNS-203-2

Basic Administration for Citrix NetScaler 9.2

Lär dig grundläggande konfiguration och administration av Citrix NetScaler 9.0. Kursen ger en förståelse av NetScaler-funktionalitet så som lastbalansering, SSL Offload, classic & advanced expressions, rate limiting, compession, content switching och AppExpert mallar mm. Kursen är instruktörsledd med interaktiva labbar och övningar. Läromedlet består av en bok, med teori och övningar. Kursledaren arbetar även som konsult och delar med sig av sin praktiska erfarenhet.

VM1101

VMware Site Recovery Manager

This hands-on training course is aimed at experienced VMware Infrastructure 3 administrators. The course covers installation, configuration, and operation of VMware Site Recovery Manager (SRM) and testing of disaster recovery plans with SRM.

VM1102

VMware vCloud: Architecting the VMware cloud

This course is designed to guide students through the decision points and policy choices available for designing and implementing a VMware vCloud™ environment. Students will learn to appreciate the effects of design choices in VMware vSphere™, VMware vCloud Director, VMware vCenter™ Chargeback, and the VMware® vShield Edge capability that is included with vCloud Director. The course culminates in a comprehensive workshop on VMware cloud design.

VM1103

VMware vCloud: Overview

This course demonstrates to technical personnel how the VMware vCloud™ solution delivers IT services in a cloud environment. The course focuses on enterprise usage in a private cloud but also includes information on how this approach supports moving to a hybrid or public cloud.

VM1104

VMware vSphere 4 : Whats New

This hands-on training course explores new features in future versions of VMware® vCenter Server and ESX™/ESXi, as well as how to upgrade to vSphere 4.

VM1105

VMware vSphere Skills For Operators V4

This hands-on training course explores configuration and management of VMware vSphere™ virtual machines. Upon completion of this course, you should have the skills necessary to work effectively with VMware® virtual machines. The course is based on VMware ESX™ 4.0 and VMware vCenter™ Server 4.0.

VM1106

VMware vSphere: Advanced Fast Track

This fast-paced, extended-hour, lab-intensive course includes the content of the VMware vSphere: Manage for Performance and VMware vSphere: Troubleshooting courses. This course provides the knowledge and skills necessary to make fundamental design decisions that enhance performance and meet performance goals in a deployed VMware vSphere™ installation.

VM1107

VMware vSphere: Automation Fast Track 

This fast-paced, extended-hour training course includes the content of the VMware vSphere: Install, Configure, Manage and VMware vSphere: Automation with vSphere PowerCLI courses. This hands-on course explores installation, configuration, and management of VMware vSphere™ using the VMware vSphere Client and VMware vSphere PowerCLI. vSphere PowerCLI automation can reduce your IT costs while improving efficiency, availability, flexibility, and manageability.

VM1108

VMware vSphere: Automation with vSphere PowerCLI 

This hands-on training course introduces the use of VMware vSphere PowerCLI to automate VMware vSphere 4. This course demonstrates ways to automate tasks that can reduce your IT costs while improving efficiency, availability, flexibility, and manageability.

VM1109

VMware vSphere: Design Workshop

This course explores a design methodology, criteria, and approach for designing a VMware vSphere™ 4 virtual datacenter architecture consisting of VMware ESX™/ESXi 4 and VMware vCenter™ Server 4. This course, by discussing the benefits and risks of available design alternatives, provides information which supports making sound design decisions. This course also provides an opportunity to practice your design skills by working with peers on a design project.

VM1110

VMware vSphere: Exam Preparation Workshop

This workshop will be an opportunity to prepare for the VMware Certified Professional 4 (VCP4) examination.

VM1111

VMware vSphere: Manage for Performance

This hands-on training course explores the management of performance in a VMware® vSphere™ environment. It provides the knowledge and skills necessary to make fundamental design decisions that enhance performance and to meet performance goals in an already-deployed vSphere installation. The course is based on ESX 4.0, ESXi 4.0, and vCenter Server 4.0.

VM1112

VMware vSphere: Overview

This hands-on training course introduces the most compelling features of VMware® vSphere™ 4. This course demonstrates vSphere features that help to reduce your IT costs while improving efficiency, availability, flexibility, and manageability.

VM1113

VMware vSphere: Skills for Storage Administrators

This course enables storage administrators to better plan and manage their storage systems to support a VMware vSphere™ environment. The course uses lecture, hands-on labs, and case studies to demonstrate vSphere interaction and operation with storage rather than to teach vSphere administration skills.

VM1114

VMware vSphere: Transition to ESXi

This hands-on training course covers the requirements and effects of transitioning your VMware vSphere environment to VMware ESXi. It provides the knowledge and skills necessary to make fundamental design decisions and successfully add ESXi to a deployed vSphere environment. The course is based on ESXi 4.1.

VM1115

VMware vSphere: Troubleshooting

This lab-intensive course focuses on providing system administrators with the advanced knowledge, skills, and abilities to achieve competence in troubleshooting the VMware vSphere™ virtual infrastructure. In this course, you will spend most of the time diagnosing and rectifying configuration problems created on VMware® ESX™/ESXi hosts and VMware vCenter™ Server systems.

VM1116

VMware vSphere4: Install, Configure, Manage (ICM)

This hands-on training course explores installation, configuration, and management of VMware vSphere™, which consists of ESX/ESXi and vCenter Server. The course is based on ESX/ESXi 4.1 and vCenter Server 4.1. Completion of this course satisfies as a prerequisite to take the VMware Certified Professional 4 exam.

VM1117

Application Virtualization with VMware ThinApp

This course will provide applications-oriented administrators with the knowledge and skills to virtualize Windows applications with VMware ThinApp, modify the Package.ini parameters to handle special circumstances, and choose the best deployment and updating processes for their environment.

VM1118

VMware View 4.5: Install, Configure, Manage

This hands-on training course builds your skills in the VMware View™ suite of products: VMware View Manager, VMware View Composer, and VMware® ThinApp™. This course is based on the View 4.5 and ThinApp 4.6 releases.

VM1119

VMware View: Design Best Practices

This course presents a methodology for designing a VMware View™ solution for the VMware vSphere™ infrastructure. The design methodology includes recommendations for the type of information and data that must be gathered and analyzed to make sound design decisions for client systems, desktop options, the vSphere infrastructure, and View components.

VM11120

VMware View: Desktop Fast Track

This hands-on training course builds your skills in the VMware View™ suite of products: VMware View Manager, VMware View Composer, and VMware® ThinApp™. It will provide applications oriented administrators with the knowledge and skills to virtualize Windows applications with ThinApp and to choose the best deployment and updating processes for their environment. The course will also present a methodology for analyzing and designing a View solution for the VMware vSphere™ infrastructure.

VM1121

VMware vSphere: Install, Configure, Manage V5.0

This hands-on training course explores installation, configuration, and management of VMware vSphere®, which consists of VMware ESXi™ and VMware vCenter™ Server. The course is based on ESXi 5.0 and vCenter Server 5.0. Completion of this course satisfies the prerequisite for taking the VMware® Certified Professional 5 exam.

VM1122

VMware vSphere: What’s New V5.0

This hands-on training course explores new features in VMware vCenter™ Server 5.0 and VMware® ESXi™ 5.0. Topics include VMware vSphere® 5 installation and how to upgrade from vSphere 4.x to vSphere 5.0. vSphere 5.0 is the first version of vSphere to include only the ESXi hypervisor. Students who complete this course may enroll in any of several advanced vSphere 5.0 courses.